Assembling The Exhaust Manifold On The Engine - hsr-benelli S-series Service Manual

Put the exhaust system into a water bath and check for
air bubbles.

7.5 Assembling the exhaust manifold on the engine

Apply blue Loctite 243 on the stainless steel nut and hand
tight them on the stud screws of the cylinder head.
Tighten the screws in the X - Method with a specified torque
nd st rd
starting with the 2 cylinder continuing on 1 or 3 cylinder
rd st
and finalizing respectively on the 3 or 1 cylinder.
Tightening torque: 10 N·m
ver.2009_03 Page 146/215