Side Cover Assembling - hsr-benelli S-series Service Manual

Tighten the screws with a specified torque in x – method.
Tightening torque: 5 Nm, in X-method

10.4 Side Cover Assembling

Apply BLUE Weicon Lock AN 302-43 on the thread of the base
stud.
Screw in the base stud by hand and let the Loctite dry out.
Put in place the side cover.
Put in place the rubber washers and tighten self-locking nut
carefully by hand.
ver.2009_03 Page 184/215