hsr-benelli S-series Service Manual page 72

Internal Diameter Connecting Rod Foot
Using a caliber for small holes, measure the internal diameter
of the connecting rod foot.
INTERNAL DIAMETER CONNECTING ROD FOOT
SERVICE LIMIT: 19.040 mm
If the internal diameter of the connecting rod foot exceeds the
specified limit, change the connecting rod.
Connecting Rod Head Lateral Play:
Check the lateral play of the connecting rod with a feeler.
If the play exceeds the specified limit, remove the connecting
rod and check the width of the connecting rod head and pin.
If the width exceeds the specified limit, change the connecting
rod or the engine shaft.
CONNECTING ROD HEAD LATERAL PLAY
SERVICE LIMIT: 0.40 mm
CONNECTING ROD HEAD WIDTH
STANDARD: 2,18 - 2,19 mm
CONNECTING ROD PIN WIDTH
STANDARD: 22,0 - 22,05 mm
ver.2009_03 Page 72/215