hsr-benelli S-series Service Manual page 67

Remove the oil pump cover:
Oil Pump and Oil Sump removal
Rotate the engine 180° to access its bottom side.
Remove the oil hose attachment from the oil sump cover.
Remove the dipstick tube connection.
Untighten and remove oil sump cover mounting screws.
Remove the oil sump cover.
Dismantle Oil Pump intake tube and Oil Sump filter assy.
ATTENTION:
Note the position of the screws for correct
remounting
Remove the screws shown by circle marks on the figure.
Then remove 8 crankcase bolts shown by oval marks.
ver.2009_03 Page 67/215