Mounting In Sideway Position - GLP Ipression XL Instruction Manual

2.1.3 Mounting in sideway position

To operate the
additional mounting bar, available from GLP or one of their agents.. This
mounting bar is fixed via the four camlock quick-release connectors. Two
half-couplers or clamps are then used to hang the mounting bar. This
technique is necessary to cope with the additional torque in this
mounting position. Never use the "Mounting in hanging position"
technique described above to secure the fixture in a sideway position, as
the fixtures base can become damaged, and a secure installation cannot
be assured.
GLP German Light Products GmbH
R - G - B
R - G - B
R - G - B
I I M M P P R R E E S S S S I I O O N N X X L in a sideways position, please use an L
(Manual Version 1.06) / from Software Version 1.09/0.3)
Without mounting bar
8