Mounting On The Floor (Upright); Mounting In Hanging Position (Head First) - GLP impression rgb 120 rz Instruction Manual

2.1.1 Mounting on the Floor (Upright)

To operate the
dedicated tripod which is mounted to the bottom side of the system. It is
fixed with fasteners called Camlock quick-release connectors. Turn the
two fasteners both 90° to lock them. Do the opposite to release them
again. On both sides you'll find eyelets to pull though a fixing strap. This
allows an additional bracing of the system during the upright operation.

2.1.2 Mounting in hanging Position (Head first)

To operate the
coupler (clamp) which is mounted directly to the bottom side of the
system. It is fixed centrically with a M10x16 mm thread bolt.
GLP German Light Products GmbH
R - G - B
R - G -
R - G -
front side of the fixture
I M P R E S S I O N in an upright position, please use the
I M P R E S S I O N
2x Camlock
2x Eyelets
I M P R E S S I O N in an hanging position, please use a half-
I M P R E S S I O N
(Instruction version 1.0) / from software version 1.00/30)
B
B
1x M10
(length max.16mm)
2x Camlock
quick release
fasteners
7