2.1.1 Mounting on the floor (upright)
To operate the
the dedicated floor-stand which is shipped with all original fixtures. The
floor stand is mounted to the base of the
fixture using the two Camlock quarter turn
fasteners. Line up and engage the camlock
connectors from the floor stand into the base
of the fixture and turn the two fasteners 90°
to lock them. Do the opposite to release
them again. On both sides you'll find eyelets
to pull though a ratchet strap. This allows
additional bracing of the floor-stand during
upright operation.
2.1.1 Mounting in hanging position (Head down)
To operate the
brackets can be mounted directly to the bottom of the base using the
four Camlock connectors.
GLP
German Light Products GmbH
(Instruction version 1.93) / from software version 1.52
I
m
p
r
e
s
s
i
o
n
S
p
o
t
I
m
p
r
e
s
s
i
o
n
S
p
o
t
Camlock
Eyelet
I
m
p
r
e
s
s
i
o
n
S
p
o
t
I
m
p
r
e
s
s
i
o
n
S
p
o
t
7
o
n
e in an upright position, please use
o
n
e
Camlock
o
n
e in a hanging position, two omega
o
n
e
M10
Camlock
Gewinde
thread