Table of Contents
Advertisement
2.1.2 Mounting in hanging position (head down)
To operate the
similar clamp can be mounted directly to the bottom of the base using
the M10x16 mm threaded socket.
2.1.3 Mounting in a sideway position
To operate the
additional mounting bar, available from GLP or one of their agents.. This
mounting bar is fixed via the two camlock quick-release connectors. Two
half-couplers or clamps are then used to hang the mounting bar. This
technique is necessary to cope with the additional torque in this
mounting position. Never use the "Mounting in hanging position"
technique described above to secure the fixture in a sideway position, as
the fixtures base can become damaged, and a secure installation cannot
be assured.
GLP
German Light Products GmbH
W
W
C
&
W
W
C
&
W
W
C
&
2x Camlock
2x Eyelets
I
M
P
R
E
S
S
I
O
N in a hanging position, a half-coupler or
I
M
P
R
E
S
S
I
O
N
M10x16
I
M
P
R
E
S
S
I
O
N in a sideways position, please use an
I
M
P
R
E
S
S
I
O
N
(Instruction version 1.14) / from software version 1.00/03)
C
C
W
C
C
W
C
C
W
8
- Quick Links:
- Technical Specifications
Hide quick links:
Advertisement
Table of Contents
