Setting the Transmission Speed
Use this procedure to change the transmission speed for a one-touch speed
dialling button or a coded speed dialling code. Change the speed when it takes a
long time for your document transmissions to begin.
Make sure the OPTIONAL SETTING is on (Qp. 3-28) before following the
procedure below.
1. Use the search buttons to display 4.TX SPEED.
2. Press SET, then use the search buttons to change the speed setting.
3. Press SET.
4. To continue registering other speed dial numbers and names, continue with
Chapter 3
SET
If it takes a long time for your document transmissions to begin, this may
mean that the telephone lines in your area are in poor condition. If you
experience this problem, change the transmission speed from 14400 bps to
9600 bps or 4800 bps.
SET
the procedure from step 3 on page 3-13 (one-touch speed dialling) or from
step 4 on page 3-19 (coded speed dialling).
- or -
If you are finished, press STOP to return to standby mode.
Registering Information in the MultiPASS L90
OPTIONAL SETTING
4.TX SPEED
TX SPEED
14400bps
TX SPEED
9600bps
TX SPEED
4800bps
22/07 '97 TUE 17:20
3-33