Adjusting the Transmission Settings
When you register a number for one-touch speed dialling or coded speed dialling,
you can also set the transmission time, transmission type, long distance setting,
and the transmission speed.
Before you can set any of the transmission settings, you need to turn the
OPTIONAL SETTING on. Follow the procedure below after completing step 7
on page 3-15 (one-touch speed dialling) or step 8 on page 3-20 (coded speed
dialling).
1. Use the search buttons to display ON.
2. Press SET.
Setting the Transmission Time
Use this procedure to set the transmission time for a one-touch speed dialling
button or a coded speed dialling code.
Make sure the OPTIONAL SETTING is on (see above) before following the
procedure below.
1. Use the search buttons to display 1.SET TIME.
2. Press SET, then use the search buttons to select a line.
To clear a time setting, press CLEAR. If you clear all settings, the document will
not be sent at a set time.
3-28
Registering Information in the MultiPASS L90
SET
SET
You can set 1 to 5 settings for the transmission time. The procedure is the
same for all settings.
Ex: Setting 2
OPTIONAL SETTING
OPTIONAL SETTING
1.SET TIME
OPTIONAL SETTING
1.SET TIME
SET TIME
2:
Chapter 3
ON
: