Table of Contents
Advertisement
Resending a Document that Encountered an Error Signal
If you get an error signal when sending a fax from memory, you can try resending
it to the same destination without having to scan it again.
1. Press FUNCTION, then MEMORY REFERENCE.
2. Use the search buttons to display 2.MEM. RETRANSMIT.
3. Press SET, then use the search buttons to select the TX/RX number of the
Use the cursor buttons (k, j) to display the SET TIME and the other party's
number for the TX/RX number displayed. For more information, print the Doc.
Memory List as described in "Printing a List of the Documents in Memory"
(Qp. 6-14).
4. Press SET.
Chapter 6
MEMORY
FUNCTION
REFERENCE
fax you want to resend.
SET
SET
This function can only be used when the ERASE FAILED TX setting in the
SEND (TX) SETUP menu is set to OFF. See page A-6, for details on
changing the setting.
The fax is erased from memory after it is successfully sent.
MEMORY REFERENCE
1.DELETE DOCUMENT
MEMORY REFERENCE
2.MEM. RETRANSMIT
MEM. RETRANSMIT
RX/TX NO.
0002
Special Features
6-13
Advertisement
Table of Contents
