Table of Contents
Advertisement
SEND (TX) SETUP
Menu Item
Sub-item
1. ECM TX
2. MID PAUSE SET
3. AUTO REDIAL
1. REDIAL TIMES
2. REDIAL INTERVAL
3. TX ERROR
RESEND
RESEND TX FROM
4. ERASE FAILED TX
5. AUTO START TX
Appendix A
Description
Turn Error Correction Mode
(ECM) for transmissions on or
off.
Set the length of the pause
entered by each press of the
PAUSE button.
Set whether the unit
automatically redials when the
receiving line is busy or when
an error occurs.
Set the maximum number of
redials.
Set how long the fax waits
between rediallings.
Set whether the fax redials if
an error occurs while sending.
Set which pages to resend if
TX ERROR RESEND is on.
Set whether the fax in memory
is erased if an error occurs
during sending.
When sending to multiple
numbers, set whether the unit
starts scanning the document
five seconds after the first
number is entered, and ten
seconds after the second and
all subsequent numbers. If the
machine begins scanning
before you have entered all
numbers, you must scan the
document again for those
missed numbers.
Options
Comments
ON*, OFF
ON: Transmitting is done in error
correction mode.
OFF: Transmitting is done without
error correction.
01-15 SEC (02*)
A pause at the end of a number is
ten seconds long.
ON*, OFF
If you turn AUTO REDIAL on, you
can make the additional settings
below.
01-15 TIMES (02*)
02-99 MIN. (02*)
ON*, OFF
ON: The unit redials after a sending
error.
OFF: The unit does not redial.
ERROR & 1ST PG*,
ERROR & 1ST PG: Resends the
ERROR PAGE,
first page and the page the error
ALL PAGES
occurred on.
ERROR PAGE: Resends only the
page the error occurred on.
ALL PAGES: Resends all the
document pages.
ON*, OFF
ON: The fax is automatically erased
after being successfully sent
(originally an error occurred during
sending.)
OFF: The document will remain in
memory even if an error occurs
during sending.
ON*, OFF
ON: The unit scans the document in
five or ten seconds.
OFF: The fax does not scan the
document in 5 or 10 seconds. Press
document. Otherwise, the unit will
return to standby mode after 60
seconds.
START/COPY to scan the
*:Default
The Menu System
A-7
Advertisement
Table of Contents
