Table of Contents
Advertisement
5. Press SET twice.
6. Enter the speed dial numbers you want to store in the group.
Chapter 3
Each one-touch speed dial button or coded speed dial code can store either a
name and number for speed dialling or a group. Be careful not to override
speed dial names and numbers when creating and storing groups.
If you wish to register a group under a one-touch speed dialling button or
coded speed dialling code already registered for speed dialling, or if you want
to re-enter a group, you must delete the previous information first. (Qp. 3-16,
3-21)
SET
SET
If you want to enter a number that is already stored in a one-touch speed
dialling button, press FUNCTION (the FUNCTION lamp goes off), press
the desired one-touch speed dial button(s), and press FUNCTION again
(the FUNCTION lamp goes on).
FUNCTION
Ex:
06
If you want to enter a number that is already stored in a coded speed
dialling code, press CODED DIAL, then enter the two-digit code for the
number. (Press CODED DIAL between each entry.)
CODED DIAL
Ex:
0
You can add new numbers to a group already registered for group dial.
If you want to clear a mistaken entry, press CLEAR.
Use the search buttons (h, i ) to scroll through the list of speed dial numbers
registered in the group.
If you wish to delete a number in the list, display that number using the search
buttons, then press CLEAR.
You can not register numbers in the group that have not been registered for
speed dialling.
If all numbers in a group are deleted, group dialling is cancelled.
You can cancel registering or correcting numbers and return to standby mode
by pressing
(STOP) anytime before pressing SET in Step 7.
FUNCTION
7
Registering Information in the MultiPASS L90
TEL=
3-25
Advertisement
Table of Contents
