Table of Contents
Advertisement
Installing/Replacing the Toner Cartridge
The MultiPASS L90 uses a Canon FX3 toner cartridge. The procedure below
explains how to install the cartridge for the first time, and how to replace it when
the toner runs out.
When the message REPLACE CARTRIDGE appears, the toner in the cartridge
may simply be unevenly distributed. Before replacing the cartridge, follow the
instructions on page 10-13 to evenly distribute the toner. If after doing this the
message remains displayed or the print quality is low, replace the cartridge as
described below.
Canon makes numerous cartridges. The FX3 toner cartridge has been designed
specially for the MultiPASS L90 and is the only one Canon recommends that you
use.
1. Remove any documents or printed pages from the unit.
2. Make sure the MultiPASS L90 is plugged in.
3. Open the printer cover by grasping it at both sides and lifting it up.
4. If replacing a used cartridge, remove the old one as shown.
Chapter 2
Getting Started
2-21
Advertisement
Table of Contents
