Table of Contents
Advertisement
Installing/Replacing the Toner Cartridge
The LASER CLASS 2060P uses a Canon FX-3 toner cartridge. The
procedure below explains how to install the cartridge for the first time,
and how to replace it when the toner runs out.
When the message REPLACE CARTRIDGE appears, the toner in the
cartridge may simply be unevenly distributed. Before replacing the
cartridge, follow the instructions on page 13-28 to evenly distribute the
toner. If after doing this the message remains displayed or the print
quality is low, replace the cartridge as described below.
N
Canon makes numerous cartridges. The FX-3 toner cartridge has been
designed specially for the LASER CLASS 2060P and is the only one
Canon recommends that you use.
1.
Remove any documents and/or printed pages from the unit.
2.
Make sure the LASER CLASS 2060P is plugged in.
3.
Open the front cover by lifting the right side release latch of the unit.
❏ Lift the cover forward to its open position.
2-34
Setting Up Your LASER CLASS 2060P
Chapter 2
Advertisement
Table of Contents
