Front Panel - Extron electronics FOXBOX Tx HDMI User Manual

r
Remote RS-232 port — For serial control of the receiver, connect a host device, such
as a computer, touch panel control, or RS-232 capable PDA, to the transmitter via this
3-pole captive screw connector. See
connector. See "Remote
s
DC power connector — Plug the included external 12 VDC power supply into this
"Power supply
connector. See

Front panel

20 22 21
CONFIG
Figure 7.
FOXBOX Rx Receiver Front Panel Features
t
Power LED — T his LED lights to indicate that power is applied to the unit .
u
Indicators —
HDMI LED — HDMI video input
HDCP LED — This LED lights when the output signal is HDCP encrypted.
Audio LED — This LED lights on the receiver when the transmitter detects a low level
audio signal for a short period of time. It returns to unlit if the audio signal drops below
the minimum threshold for a short period of time.
v
Configuration port — Connect a controlling device, such as a PC, to this port via a
2.5 mm mini jack TRS RS-232 cable for RS-232 protocol control of all FOXBOX functions.
"Front panel Configuration
See
cable. See "Remote Control" on page 17 for SIS commands and software control.
The TRS RS-232 cable is included with the FOXBOX Tx HDMI transmitter.
"RS-232 connections" on page 13 to wire this
Control" on page 17 for SIS commands and software control.
wiring" on page 15, to wire the connector.
ports"on page 14 for more details on the adapter
FOXBOX Tx/Rx HDMI • Installation and Operation
FOXBOX Rx HDMI
11