Table of Contents
Advertisement
Control/remote
Serial control ports on each unit (transmitter and receiver)
Control .................................... 1 RS-232, 2.5 mm mini stereo jack (front panel)
Pass-through ............................ 1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used) (rear panel)
Baud rate and protocol
Control .................................... 9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through ............................ 9600 to 115,200 baud
Serial control pin configuration ....... Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND
Program control ............................. Extron control/configuration program for Windows
General
Power supply .................................. External
Power consumption
Transmitter
Device ................................ 5.7 watts, 12 VDC
Device and power supply ... 7.2 watts, 12 VDC
Receiver
Device ................................ 6.9 watts, 12 VDC
Device and power supply ... 8.7 watts, 12 VDC
Temperature/humidity .................... Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Cooling .......................................... Convection, vents on top and side panels
Thermal dissipation
Transmitter
Device ................................ 16.1 BTU/hr
Device and power supply ... 21.3 BTU/hr
Receiver
Device ................................ 22.1 BTU/hr
Device and power supply ... 28.3 BTU/hr
Mounting
Rack mount ............................. Yes, with optional rack shelf
Furniture mount ...................... Yes, with optional under desk mounting kit
Enclosure type ................................ Metal
Enclosure dimensions
Transmitter .............................. 1.0" H x 4.3" W x 6.0" D (quarter rack wide)
Receiver ................................... 1.0" H x 8.75" W x 6.0" D (half rack wide)
Product weight
Transmitter .............................. 0.7 lbs (0.3 kg)
Receiver ................................... 1.1 lbs (0.5 kg)
Shipping weight
Transmitter .............................. 3 lbs (2 kg)
Receiver ................................... 4 lbs (2 kg)
Vibration ........................................ ISTA 1A in carton (International Safe Transit Association)
1 RS-232, 3.5 mm captive screw connector, 3-pole (rear panel) (receiver only)
Captive screw: 1 = Tx, 2 = Rx, 3 = GND
Extron Simple Instruction Set (SIS
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors and switch.)
FOXBOX Tx/Rx HDMI • Reference Information
®
™
)
38
Advertisement
Table of Contents
