Table of Contents
Advertisement
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
95XF series
3.25 INSPECTION AND ADJUSTMENT, LOAD-DEPENDENT CONTROL VALVE,
LEAF SUSPENSION
Explanatory notes on instruction plate
The instruction plate contains details of the axle
loads and output pressures; these correspond to
the order of the axles underneath the vehicle.
So "1" is the front axle, etc.
To check the load-dependent control valve, the
details on the instruction plate relating to the
"driven axle" are therefore vital.
1.
Measure the rear axle load.
Note:
Vehicles equipped with a trailing axle with
leaf spring should be adjusted with the
trailing axle lowered. When adjusting the
ALR valve, take the weight of both axles.
2.
Check the attachment of the control lever
and its ease of operation.
3.
Also check whether the correct valve and
the correct springs have been fitted (for
information, see the instruction plate).
4.
Check length L of the control lever (see
instruction plate).
5.
Connect pressure gauge (1) to the test
connection (1) of the load-dependent valve
and pressure gauge (2) to the test
connection on one of the spring-brake
cylinders (service-brake connection) of the
rear axle.
6.
Make sure that the reservoir pressure
exceeds 6.5 bar.
200424
Inspection and adjustment
1261660
TYPE - TIPO : FA
AUTOM. LASTAFHANKELIJKE REMKRACHTREGELING
AUTOM. LOAD SENSING DEVICE
AUTOM LASTABHANGIGE BREMSKRAFT REGELINR.
DISPOSITIF DE CORRECTION AUTOM DE FREINAGE
REGOLATORE AUTOM. DELLA FORZA FRENANTE
REGULADOR AUTOM. DEL ESFUERZO DE FRENADA
1
2 L
3
5
M6045
M6106
3-33
Hide quick links:
Advertisement
Chapters
Table of Contents
