DAF 95XF Maintenance Manual page 75

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
95XF series
7. Install a dial gauge.
8. Set the dial gauge to "0".
9. Turn the adjusting bolt counter-clockwise
until the value on the dial gauge equals the
C-brake setting value, see "Technical data".
Note:
The setting value is also shown on the
shield (1) fitted on the C-brake housing.
10. Tighten the lock nut to the specified
tightening torque. See "Technical data".
Use special tool (DAF no. 1240042).
11. Repeat this adjustment procedure for the
remaining cylinders. Consult the following
table to this end.
Marks on drive pulley:
Adjustment of cylinder C-brake:
A
B
C
A
B
C
12. Fit the valve covers. See "Removal and
installation".
 200424
5
3
6
2
4
1
Inspection and adjustment
0
M2152
5
3-15