DAF 95XF Maintenance Manual page 27

95XF series
10.LEADING REAR AXLE 09N044 (FTP-TYPE VEHICLES)
10.1 GENERAL
Wheel bearing play
10.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening
torques stated in the overview of standard
tightening torques. Any other threaded
connections that are not specified must
therefore be tightened to the tightening torque
stated in the overview of standard tightening
torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed, unless stated otherwise.
Hub nut
Hub cap
U-bolt nut M20, property class 10
(1)
Turn back until split pin can be fitted.
(2)
Evenly tighten the two U-bolt nuts alternately.
Leading rear axle 09N044 (FTP-type vehicles)
0 mm
(1)
100 Nm
500 Nm
(2)
553 Nm
TECHNICAL DATA
10-1
0