DAF 95XF Maintenance Manual page 133

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
95XF series
Removing the V-belt of the air-conditioning
compressor drive
1. Loosen the lower attachment bolt (1) of the
alternator.
2. Loosen the upper attachment bolt (2) of the
alternator.
3. Loosen the attachment bolt (3) of the
threaded spindle that is fixed to the water
pump.
4. Turn the locknuts (4) and (5) on the
threaded spindle so that the alternator can
be tilted towards the cylinder block and the
V-belt can be removed from the pulley.
5. Slacken the upper attachment bolt (1) of the
compressor.
6. Slacken the lower attachment bolt (2) of the
compressor.
7. Loosen the attachment bolt from the
threaded spindle which is attached to the
water pump.
8. Turn the lock nut (3) on the threaded
spindle so that the compressor is tilted
towards the cylinder block and the V-belt
can be removed.
Installing the V-belt of the air-conditioning
compressor drive
1. Inspect the pulleys for damage, rust and
grease deposits.
2. Fit the V-belt for the air-conditioning
compressor drive and adjust the V-belt
tension. See chapter "Inspection and
adjustment".
3. Install the V-belt for the water pump,
alternator and fan drive and adjust the
V-belt tension, see chapter "Inspection and
adjustment".
 200424
Removal and installation
3 5 4
1
1
2
2
1
M200550
5
3
M2041
4-13