DAF 95XF Maintenance Manual page 154

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Removal and installation
A B C
5
Installing the hub oil seal
1. Check the seal chamber (4) in the hub (2)
for damage.
2. For the installation of the hub oil seal (4)
use special tool (DAF no. 1240036).
3. Assemble the special tool: turn the
threaded ends (A) and (L) into the centring
spindle (E). Assemble the short stud (L) on
the side where the pin is located in the
centring spindle (E).
4. Slide the appropriate centring flange (F)
over the centring spindle (E).
5. Install the inner wheel bearing (3). Slide the
centring spindle (E) with the centring flange
(F) into the hub (2).
6. Press the centring flange (F) into the inner
wheel bearing (3).
4-34
D
1
E F
2 3
4
95XF series
H I K L
G
S7 00 180
 200424