DAF 95XF Maintenance Manual page 156

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Removal and installation
LEADING REAR AXLE 09N044 (FTP-TYPE VEHICLES)
Removing the hub oil seal
1. Remove the hub from the axle journal.
2. Drill two holes into the oil seal and screw
the special tool (DAF no. 0484899) into the
oil seal. Pull the oil seal from the wheel hub
using the special tool (DAF no. 0694928).
Installing the hub oil seal
1. Check the seal chamber for damage.
2. For installation of the hub oil seal (4) use
special tool (DAF no. 1329497).
3. Apply a little grease to the sealing lips of the
oil seal.
4. Install the hub on the axle journal.
5
4-36
95XF series
 200424