Table of Contents
Advertisement
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Draining and filling
If the vehicle is equipped with water/air cab
heater
1.
Run the engine at idling speed.
2.
Switch on the cab heater, using the rocker
switch on the dashboard.
3.
Turn the heater temperature control knob in
the cab to the "warmest" setting.
4.
Switch on the heater fan.
5.
Set the rocker switch on the thermostat in
the cab to position 1.
Note:
Combustion will start after approximately
one minute.
6.
Allow the cab heater to operate for
approximately 15 minutes.
7.
Then check the coolant level.
5
5-6
95XF series
200424
Hide quick links:
Advertisement
Chapters
Table of Contents
