DAF 95XF Maintenance Manual page 123

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
95XF series
VF engine
Removing the oil filter
1. Place a tray beneath the filter.
2. Remove the filter by turning it
counter-clockwise using special tool
(DAF no. 1240115).
Note:
The oil filter is a disposable filter, and may
not be cleaned and reused.
Installing the oil filter
1. Fill the new oil filter before fitting using the
specified oil grade.
2. Lightly lubricate the sealing ring with engine
oil.
3. Fit the filter so that the seal makes contact.
Then tighten the filter to the specified
tightening torque, see "Technical data".
4. Start the engine, and run it at idling speed
for a short time. Check whether the oil filter
is correctly sealed.
5. Then check the oil level.
 200424
Removal and installation
M200370
M200371
5
4-3