EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
95XF series
Installing the gearbox oil filter
1.
Check the O-ring of the filter cover (2) for
any damage. Replace the O-ring if
necessary. Grease the O-ring.
2.
Grease the O-ring of the new filter (3) and
place the filter on the filter cover.
Then insert the filter and the filter cover into
the filter housing.
3.
Use a plastic mallet to tap the filter cover
into the filter housing.
4.
Tighten the attachment bolt (1) to the
specified tightening torque, see "Technical
data".
200424
Removal and installation
1
M3052
4-23
5