DAF 95XF Maintenance Manual page 115

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
95XF series
5. The specified wheel-bearing play is
achieved by turning the adjusting nut (1)
counter-clockwise between 45° and 60°
(distance A - B in the drawing) using the
adjusting spanner (A). The precise angle
should be such that the circlip (2) can be
fitted. If necessary, turn the circlip around,
changing the hole pattern.
6. Fit the circlip (2) so that the circlip lip falls
into the key groove of the axle journal and
the dowel of the adjusting nut (1) falls into
one of the holes of the circlip (2).
 200424
Inspection and adjustment
1
A
S7 00 085
S7 00 086
5
2
1
3-55