DAF 95XF Maintenance Manual page 157

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
95XF series
4.18 REMOVAL AND INSTALLATION, HUB OIL SEAL/WHEEL SPEED SENSOR
RING UNIT
Removing the hub seal/wheel speed sensor
ring
1. Remove the hub from the axle journal.
2. Fit the special tool (3) (DAF no. 1329411)
to the impact puller (2), special
tool (DAF no. 0694928). Hook special
tool (3) (DAF no. 1329411) behind the oil
seal (1). Pull the seal (1) from the hub using
impact puller (2). The removed seal (1)
cannot be used again.
A B C D
Installing the hub seal/wheel speed sensor
ring
1. Check the seal chamber (4) in the hub (2)
for damage.
2. For the installation of the hub oil seal (4)
use special tool (DAF no. 1240036).
 200424
E
1 2
Removal and installation
1
3
F
3 H
4 G
2
S7 00 424
5
I K L
S7 00 405
4-37