DAF 95XF Maintenance Manual page 110

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Inspection and adjustment
3.45 RETIGHTENING THE HUB NUT OF LEADING REAR AXLE 09N044
(FTP-TYPE VEHICLES)
1. Remove the hub cap (4) using special tool
(DAF no. 1329498).
2. Lift the leading rear axle.
3. Release the brakes.
4. Remove the split pin (3) from the hub
nut (2).
5. Tighten the lock nut to the specified
tightening torque, see "Technical data". Turn
the wheel at least 5 revolutions clockwise
and then 5 revolutions anti-clockwise while
fixing the hub nut.
6. Check that the wheel rotates smoothly.
7. Turn back the hub nut until the split pin can
be fitted. Fit a new split pin.
5
Note:
There are 2 split pin holes in the axle
journal. Select the split pin hole where the
hub nut needs to be turned back least.
8. Fit the hub cap. Tighten the hub cap to the
specified torque using the special tool (DAF
no. 1329498). See "Technical data".
9. Adjust the brakes.
3-50
95XF series
1 2 4
3
S7 00 657
 200424