Changing The Headlight Bulb; Changing The Turn Signal Bulb (All Exc Models) - KTM 125 EXC Owner's Manual

15 ELECTRICAL SYSTEM
15.7

Changing the headlight bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
15.8

Changing the turn signal bulb (All EXC models)

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Position the headlight mask and fix it with rubber straps
The holding lugs engage.
–
Position the brake line and wiring harness. Put the clamp on and mount and
tighten screw
602762-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Turn protection cap
all the way and remove it.
–
Pull lamp socket
B01562-10
–
Pull out headlight bulb
–
Insert the new headlight bulb.
Headlight (HS1 / socket BX43t) (
–
Insert the protection cap with the bulb socket into the reflector and turn it clock-
wise all the way.
Info
Ensure that the O-ring
B01563-10
–
Insert the lamp socket of the parking light into the reflector.
Finishing work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (

.
p. 96)

together with the underlying bulb socket counterclockwise

of the parking light out of the reflector.

.
p. 121)

is seated properly.
p. 96)

.
p. 94)
p. 94)
95