Display Mode Speed/A1 (Average Speed 1); Display Mode Speed/A2 (Average Speed 2) - KTM 125 EXC Owner's Manual

7 SPEEDOMETER
7.19

Display mode SPEED/A1 (average speed 1)

7.20

Display mode SPEED/A2 (average speed 2)

Info
The TR2 value can also be corrected manually during the journey with the but-
ton
If 999.9 is exceeded, the value of TR2 is automatically reset to 0.0.
Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
Briefly press the
button .
Wait 10–12 sec-
onds
–
Repeatedly press the button
play.
A1 (average speed 1) shows the average speed calculated using TR1 (trip master 1) and
S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button
for 2–3 seconds.
Briefly press the
400325-01
button .
Press the button
for 2–3 seconds.
Briefly press the
button .
–
Repeatedly press the button
play.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if S2 was not
stopped after the ride.
Briefly press the
400326-01
button .
Press the button
for 2–3 seconds.
Press the button
for 2–3 seconds.
Briefly press the
button .
and the button .
Increases value of TR2.
Increases value of TR2.
Reduces value of TR2.
Reduces value of TR2.
Saves and closes the Setup menu
briefly until A1 appears at the top right of the dis-
Displays of TR1, A1 and S1 are reset to 0,0.
Next display mode
No function
No function
briefly until A2 appears at the top right of the dis-
Next display mode
No function
No function
No function
27