12
SERVICE WORK ON THE CHASSIS
12.17
Greasing the steering head bearing
12.18
Removing the front fender
(EXC Factory Edition)
–
Loosen screws
–
Loosen and retighten screw
Guideline
Screw, top steering head
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Tighten screws
M00593-10
Guideline
Screw, top triple clamp
–
Mount and tighten screw
Guideline
Screw, top steering stem
Finishing work
–
Check the play of the steering head bearing. (
–
Remove the motorcycle from the lift stand. (
(EXC, XC‑W)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
(Six Days, EXC Factory Edition)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
800010-10
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
B02155-10
–
Remove screws
B02156-11
. Remove screw
.
.
.
.
M8
(
p. 54)
(
p. 55)
(
p. 54)
(
p. 57)
.
. Remove the front fender.
M20x1.5
12 Nm
(8.9 lbf ft)
M8
17 Nm
(12.5 lbf ft)
17 Nm
Loctite
®
(12.5 lbf ft)
p. 58)
p. 50)
p. 94)
60
243™