Kill Switch (Six Days Eu); Kill Switch (All Xc-W Models); Horn Button (Exc Eu/Au, Exc Factory Edition, 300 Exc Br); Horn Button (Six Days Eu) - KTM 125 EXC Owner's Manual

6 CONTROLS
6.5

Kill switch (Six Days EU)

6.6

Kill switch (All XC-W models)

6.7

Horn button (EXC EU/AU, EXC Factory Edition, 300 EXC BR)

6.8

Horn button (Six Days EU)

6.9

Light switch (EXC EU/AU, EXC Factory Edition, 300 EXC BR)

The kill switch
Possible states
• Kill switch
and the engine can be started.
• Kill switch
ning engine stops, and a non-running engine will not start.
102044-10
The kill switch
Possible states
• Kill switch
the engine can be started.
• Kill switch
ning engine stops, and a non-running engine will not start.
B01144-10
The horn button
Possible states
• Horn button
• Horn button
B01585-11
The horn button
Possible states
• Horn button in neutral position
Horn button pressed – The horn is operated in this position.
•
102044-11
The light switch
Possible states
B01585-12

is fitted on the left side of the handlebar.
in the basic position – In this position, the ignition circuit is closed
is pressed – In this position, the ignition circuit is interrupted, a run-
 is fitted on the left side of the handlebar.
in basic position – In this position, the ignition circuit is closed and
pressed – In this position, the ignition circuit is interrupted, a run-

is fitted on the left side of the handlebar.
in neutral position
pressed – The horn is operated in this position.
 is fitted on the left side of the handlebar.

is fitted on the left side of the handlebar.
Light off – Light switch is turned to the right. In this position, the light
is switched off.
Low beam on – Light switch is in the central position. In this position,
the low beam and tail light are switched on.
High beam on – Light switch is turned to the left. In this position, the
high beam and the tail light are switched on.
14