Adjusting The Spring Preload Of The Fork (Exc, Xc-W, Exc Factory Edition); Handlebar Position - KTM 125 EXC Owner's Manual

11 TUNING THE CHASSIS
11.14 Adjusting the spring preload of the fork (EXC, XC‑W, EXC Factory Edition)
11.15

Handlebar position

(250/300 Six Days)
Rebound damping
–
Turn the adjusting screws counterclockwise all the way.
Info
Make the same adjustment on both fork legs.
–
Turn clockwise by the number of turns corresponding to the fork type.
Guideline
(125 EXC EU, all 200 models, 125 EXC Factory Edition EU)
Spring preload - Preload Adjuster
M00092-01
Comfort
Standard
Sport
(250/300 EXC EU/AU, XC-W US, 250/300 EXC Factory Edition, 300 EXC BR)
Spring preload - Preload Adjuster
Comfort
Standard
Sport
Info
Turn clockwise to increase spring preload; turn counterclockwise to reduce
spring preload.
Adjusting the spring preload has no influence on the absorption setting of
the rebound damping.
Basically, however, you should set the rebound damping higher with a
higher spring preload.
On the upper triple clamp, there are two holes a distance of
Hole distance A
The holes on the handlebar support are placed at a distance of
Hole distance B
The handlebar can be mounted in four different positions. In this way, the handlebar
can be mounted in the position that is most comfortable for the rider.
401932-01
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
15 mm (0.59 in)
3.5 mm (0.138 in)
15 clicks
13 clicks
11 clicks
1 turn
2 turns
2 turns
1 turn
2 turns
2 turns

apart.

from the center.
48