Display Mode Speed/Odo (Odometer); Display Mode Speed/Tr1 (Trip Master 1); Display Mode Speed/Tr2 (Trip Master 2); Setting Tr2 (Trip Master 2) - KTM 125 EXC Owner's Manual

7 SPEEDOMETER
7.15

Display mode SPEED/ODO (odometer)

7.16

Display mode SPEED/TR1 (trip master 1)

7.17

Display mode SPEED/TR2 (trip master 2)

7.18

Setting TR2 (trip master 2)

–
Repeatedly press the button
display.
The total traveled distance is shown in display mode ODO.
Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
400317-01
Briefly press the
button .
–
Repeatedly press the button
play.
TR1 (trip master 1) runs constantly and counts up to 999.9.
You can use it to measure trips or the distance between refueling stops.
TR1 is coupled with A1 (average speed 1) and S1 (stop watch 1).
Info
If 999.9 is exceeded, the values of TR1, A1 and S1 are automatically reset to
0.0.
400323-01
Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
Briefly press the
button .
–
Repeatedly press the button
play.
TR2 (trip master 2) runs constantly and counts up to 999.9.
Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
400324-01
Briefly press the
button .
Condition
• The motorcycle is stationary.
–
Repeatedly press the button
play.
–
Press the button
The displayed value can be set manually with the button
very practical function when riding using the road book.
400324-01
briefly until ODO appears at the bottom right of the
No function
Next display mode
No function
No function
briefly until TR1 appears at the top right of the dis-
Displays of TR1, A1 and S1 are reset to 0,0.
Next display mode
No function
No function
briefly until TR2 appears at the top right of the dis-
Clears the values TR2 and A2.
Next display mode
Reduces value of TR2.
Reduces value of TR2.
briefly until TR2 appears at the top right of the dis-
for 2–3 seconds until TR2 flashes.
26
and the button . This is a