Display Mode Speed/S1 (Stop Watch 1); Display Mode Speed/S2 (Stop Watch 2); Table Of Functions - KTM 125 EXC Owner's Manual
Hide thumbs
Also See for 125 EXC:
- Owner's manual (150 pages) ,
- Owner's handbook manual (45 pages) ,
- Manual (12 pages)
Table of Contents
Advertisement
7
SPEEDOMETER
7.21
Display mode SPEED/S1 (stop watch 1)
7.22
Display mode SPEED/S2 (stop watch 2)
7.23
Table of functions
Display
Press the but-
ton
seconds.
Display mode
The display
SPEED/H (service
changes to the
hours)
Setup menu of
the speedome-
ter functions.
Setup menu
No function
Setting the unit of
No function
measurement
Display mode
The display
SPEED/CLK (time)
changes to the
Setup menu of
the clock.
Setting the clock
Increases the
value
–
Repeatedly press the button
play.
S1 (Stop watch 1) shows the riding time based on TR1 and continues running as soon
as an impulse arrives from the wheel speed sensor.
The calculation of this value starts with the first impulse from the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button
for 2–3 seconds.
Briefly press the
400327-01
button
Press the button
for 2–3 seconds.
Briefly press the
button
–
Repeatedly press the button
play.
S2 (Stop watch 2) is a manual stop watch.
If S2 is running in the background, the display S2 flashes on the speedometer.
Press the button
for 2–3 seconds.
Briefly press the
button
Press the button
400328-01
for 2–3 seconds.
Briefly press the
button
Briefly press the
for 2–3
button
.
Next display
mode
Activates the
flashing display
and changes to
the next display
Starts selection,
activates Km/h
display
Next display
mode
Increases the
value
briefly until S1 appears at the top right of the dis-
Displays of TR1, A1 and S1 are reset to 0,0.
Next display mode
.
No function
No function
.
briefly until S2 appears at the top right of the dis-
The displays of S2 and A2 are set to 0,0.
Next display mode
.
No function
Starts or stops S2.
.
Press the but-
Briefly press the
ton
for 2–3
button
seconds.
No function
No function
No function
Deactivates the
flashing display
and changes to
the next display
No function
Activates Mph
display
No function
No function
Reduces the
Reduces the
value
value
Wait 3–5 sec-
.
onds
Changes to the
next display
without changes
Changes to the
next display,
changes from
selection to the
Setup menu
Changes to the
next value
28
Wait 10–12 sec-
onds
Setup menu
starts, stores
the settings,
and changes to
H or ODO.
Saves and
closes the Setup
menu
Closes the
SETUP menu
Advertisement
Table of Contents
