Checking/Correcting The Fluid Level Of The Hydraulic Clutch; Changing The Hydraulic Clutch Fluid - KTM 125 EXC Owner's Manual

Hide thumbs Also See for 125 EXC:
Table of Contents

Advertisement

12
SERVICE WORK ON THE CHASSIS
12.46

Checking/correcting the fluid level of the hydraulic clutch

Info
The fluid level rises with increasing wear of the clutch lining discs.
12.47

Changing the hydraulic clutch fluid

Warning
Environmental hazard Hazardous substances cause environmental damage.
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
(All 125/200 models)
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
Remove screws
Remove cover
Check the fluid level.
Fluid level under top edge of con-
tainer
400245-10
»
If the level of the fluid does not meet specifications:
Position the cover with the membrane. Mount and tighten the screws.
(All 250/300 models)
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
Remove screws
Remove cover
Check the fluid level.
Fluid level under top edge of con-
tainer
B01538-10
»
If the level of the fluid does not meet specifications:
Position the cover with the membrane. Mount and tighten the screws.
(All 125/200 models)
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
Remove screws
Remove cover
400245-10
.
with membrane
Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) (
p. 136)
.
with membrane
Correct the fluid level of the hydraulic clutch.
Brake fluid DOT 4 / DOT 5.1 (
Info
Wash off overflowed or spilled brake fluid immediately with water.
.
with membrane
.
4 mm (0.16 in)
.
4 mm (0.16 in)
p. 135)
.
74

Advertisement

Table of Contents
loading

Table of Contents