Setting The Clock; Display Mode Speed/Lap (Lap Time); Viewing The Lap Time - KTM 125 EXC Owner's Manual

7 SPEEDOMETER
7.12

Setting the clock

7.13

Display mode SPEED/LAP (lap time)

7.14

Viewing the lap time

Condition
• The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Press the button
Press the button
for 2–3 seconds.
Briefly press the
button .
400319-01
Press the button
for 2–3 seconds.
Briefly press the
button .
Wait 3–5 seconds
Wait 10–12 sec-
onds
–
Repeatedly press the button
display.
In the LAP display mode, up to 10 lap times can be timed with the stop watch.
Info
If the lap time continues running after the button
tions are occupied.
Lap 10 must be timed using the button
Press the button
400320-01
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
Briefly press the
button .
Condition
• The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Briefly press the button
Press the button
for 2–3 seconds.
Briefly press the
button .
400321-01
Press the button
for 2–3 seconds.
Briefly press the
button .
briefly until CLK appears at the bottom right of the
for 2–3 seconds.
Increases the value
Increases the value
Reduces the value
Reduces the value
Changes to the next value
Closes the SETUP menu
briefly until LAP appears at the bottom right of the
.
The stop watch and the lap time are reset.
Next display mode
Stops the clock.
Starts the stop watch or stop the current lap time measure-
ment, stores it and the stop watch starts the next lap.
briefly until LAP appears at the bottom right of the
.
The stop watch and the lap time are reset.
Select a lap from 1–10
No function
View the next lap time.
25
is pressed, 9 memory loca-