Setting The Unit Of Measurement; Display Mode Speed/Clk (Time) - KTM 125 EXC Owner's Manual

7 SPEEDOMETER
7.10

Setting the unit of measurement

7.11

Display mode SPEED/CLK (time)

Briefly press the
button .
Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
Wait 3–5 seconds
Wait 10–12 sec-
onds
Condition
• The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Press the button
–
Repeatedly press the button
In measurement unit mode, you can change the unit of measurement.
Info
400329-01
If no button is pressed for 5 seconds, the settings are automatically stored.
Briefly press the
button .
Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
Wait 3–5 seconds
Wait 10–12 sec-
onds
–
Repeatedly press the button
display.
The time is shown in display mode CLK.
Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
for 2–3 seconds.
400319-01
Briefly press the
button .
Activates the flashing display and changes to the next display
No function
Deactivates the flashing display and changes to the next dis-
play
No function
Changes to the next display without changes
Setup menu starts, stores the settings, and changes to H or
ODO.
briefly until H appears at the bottom right of the
for 2–3 seconds.
briefly until Km/h/Mph flashes.
Starts selection, activates Km/h display
No function
Activates Mph display
No function
Changes to the next display, changes from selection to the
Setup menu
Saves and closes the Setup menu
briefly until CLK appears at the bottom right of the
The display changes to the Setup menu of the clock.
Next display mode
No function
No function
24