Consumable Parts; Thermal Paper Roll - Star TSP100III Series Hardware Manual

When consumable parts have run out, use those specified in the table below.
Note: Access the following URL for the information of the recommended paper.
https://www.star-m.jp/prjump/000089.html
Make sure that the AC adapter specified in the table is used.
Use of consumable parts or AC adapter which are not specified in the table may result in dam-
age to the printer, fire or electric shock.

4-1. Thermal Paper Roll

(1) Paper roll specification
Width: 111.5±0.5 mm or 79.5±0.5 mm
Outer roll diameter: ø100 mm or less
Take up paper roll width: 112
Thickness: 65~150 µm (when using 115.5 mm width paper)
Core outer/inner diameter
Paper thickness
65~75 µm
65~75 µm
75~150 µm
Printed surface:
Tail end handling: Do not use paste or glue to secure the paper roll or its core.

4. Consumable Parts

+0.3
-1
65~85 µm (when using 79.5 mm width paper)
Core outer
ø18±1 mm
ø32±1 mm
ø32±1 mm
Outer edge of roll
Do not fold the tail end of the paper.
mm or 80 mm
+0.5
-1
Core inner
ø12±1 mm
ø25.4 mm
ø25.4 mm
– 26 –