Configuring An Ip Address - GeoVision GV-Mini User Manual

3.4 Configuring an IP Address

The purpose of configuring an IP address is to support the remote monitoring, control and
configuration of the GV-Mini DVR V2 over a network connection.
The GV-Mini DVR V2 is enabled for DHCP network. An IP address will be automatically
allocated when the GV-Mini DVR V2 is powered up. Despite the DHCP setting, it is
recommended that a static IP address be configured on the unit.
The GV-Mini DVR V2 uses Windows operating system to configure an IP address. For this,
you must exit to Windows.
Note: Exiting to the Windows operating system is a protected feature. The default ID and
Password is "0000".
Exit to Windows
1. Exit the main screen to display the GV-Desktop screen.
2. Click the Settings button, and enter the valid ID and Password to display the Settings
dialog box.
3. Under Desktop Type, select Windows from the drop-down list, and click OK.
4. Click the Log Off button, and enter the valid ID and Password to display the Windows
desktop.
Figure 27
Getting Started
3
27