Removing The Housing - Epson StylusPRO 7000 Service Manual

EPSON Stylus Pro 7000

4.2.1 Removing the Housing

This sections describes the removal procedure for printer housing parts. See
below for an illustration of the housing parts.
Roll Cover
Assembly
H Top Cover
L Side
Cover
Front Cover
Assembly
Figure 4-3. Housing Part Diagram
Disassembly & Assembly
Upper Paper Guide
(behind H Top Cover)
R Side Cover
Lower Paper
Guide
4.2.1.1 Panel Unit Removal
1. Release the clips on both sides of the control panel unit and pull slightly
away from the R Side Cover.
Figure 4-4. Panel Unit Removal 1/2
Disassembly Flow
Hooks
Revision A
Panel
Unit
112