Removing The Housing - Epson DFX-5000+ Service Manual

Removing the Housing

This section describes how to remove different portions of the housing.
Removing the Top Cover
Two people are required to remove the top cover; oneperson must hold the top cover while
the other person removes the screws. If the top cover is not supported while the screws are
removed, the weight of the top cover may damage the rear hinges.
1. Open the top cover.
2. While someone supports the top cover, remove the 4 screws (2 on the right and
2 on the left) securing the top cover to the hinges and remove the cover.
EPSON DFX-5000+ Service Manual
Caution
Figure 3-10. Removing the Top Cover
Disassembly and Assembly
3-11