1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Stylus Pro 9600 Photographic Dye Ink
  6. Quick reference manual

Epson Stylus Pro 7600 Quick Reference Manual

Epson stylus pro 7600: quick reference
Hide thumbs Also See for Stylus Pro 7600:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Reference Manual
EPSON
Stylus
Pro 7600/9600
®
Quick Reference Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson Stylus Pro 7600

Summary of Contents for Epson Stylus Pro 7600

  • Page 1 EPSON Stylus Pro 7600/9600 ® Quick Reference Guide...
  • Page 2 Open the roll paper cover on the printer. Place the roll paper in the printer as shown. (The white end of the spindle goes on the right.) Make sure the printer is turned on, then press the Paper Source button until the Roll Auto Cut light comes on.

  • Page 3: Printing On Posterboard

    Make sure the printer is on and the roll paper cover is closed. Press the Paper Source button until the Sheet light comes on. Push the paper lever back to the released position. Feed the sheet into the paper slot. Make sure the right edge of the paper is straight and aligned with the scale on the roll paper cover.
  • Page 4 To remove the print, hold it and push the paper lever back to the released position. To avoid damaging the printer, never move the paper lever during printing, or while the Operate or Pause light is flashing.
  • Page 5 Banding can also be caused by selecting the incorrect paper type in your printer software. Be sure to select the paper you’re using in the EPSON printer software or in a third-party RIP. If your paper is not listed, you can use the printer’s SelecType menu to create a custom paper type...

  • Page 6: Replacing Ink Cartridges

    * If your printer uses EPSON UltraChrome™ ink, the black ink cartridges may be either Photo Black, Matte Black, or Light Black. See your Printer Guide for more information on switching between black print modes.
  • Page 7 When one of the Ink Out lights stays on and INK OUT is displayed on the control panel, the cartridge is empty. To replace the cartridge, first make sure the printer is on. Open the ink compartment cover. Raise the ink lever to the unlocked position.

  • Page 8: Service Life

    Follow these steps to replace the tank: Turn on the printer. Wait until READY or PAPER OUT appears on the control panel. Make sure the printer is on before you start. Pull out the maintenance tank from the side of the printer.

  • Page 9: Status Messages

    PRESS PAUSE BUTTON Pause light on WAIT Pause light on PAUSE Pause light flashing Error messages For a complete list of error messages, see your Printer Guide. Message Light INK LOW Ink Out light(s) flashing INK OUT Ink Out light(s) on...

  • Page 10: Where To Get Help

    World Wide Web Support for non-EPSON RIP EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON UltraChrome and EPSON Photographic Dye are trademarks and EPSON Preferred is a service mark of Epson America, Inc. Copyright © 2003 by Epson America, Inc.

Table of Contents