Epson Stylus Pro 7600 Product Information
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Stylus Pro 9600 Photographic Dye Ink
  6. Product information
Epson Stylus Pro 7600 Product Information

Epson Stylus Pro 7600 Product Information

Epson stylus pro 7600: product information
Hide thumbs Also See for Stylus Pro 7600:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Reference Manual
-
roll paper cover
ink cartridge
compartment
paper guides
Note:
The stand is optional for the Stylus Pro 7600.
optional interface
paper set lever
shield plate
parallel interface connector
paper set lever
control
panel
front
cover
AC inlet
USB interface
connector
EPSON Stylus Pro 7600 and 9600
Printer Specifications
Printing
Printing method 7 color EPSON UltraChrome ink or
6 color EPSON Photographic Dye ink
UltraChrome model switchable between
three ink modes:
❏ Photo Black Mode (uses Photo Black
❏ Matte Black Mode (uses Matte Black and
❏ Dual Matte Black Mode (uses two Matte
Nozzle
96 nozzles for each color: black 1, black 2,
configuration
cyan, magenta, yellow, light cyan, light
magenta
Maximum 2880 dpi × 1440 dpi
Resolution
Print direction
Bidirectional
Control code
ESC/P
Line spacing
1/6 inch (default), programmable in
1/1440-inch increments
Paper feed speed 200 ± 10 milliseconds per 1/6-inch line
RAM
32MB (Stylus Pro 7600)
64MB (Stylus Pro 9600)
Engine Reliability
20,000 B0 images, 360 × 360 dpi
Total print
volume
Print head life
28 billion dots per nozzle
Periodic
Pump unit, head cleaner, and cap assembly
maintenance
require replacement approximately every 2
years based on 25% duty cycle
Cutter blade life Approximately 2000 B0+ sheets (EPSON
media up to 4.33 mil thick); approximately
1000 B0+ film sheets
7/02
and Light Black cartridges)
Light Black cartridges)
Black cartridges)
®
Raster Photographic Driver
EPSON Stylus Pro 7600 and 9600 - 2

Advertisement

Table of Contents
loading

Related Manuals for Epson Stylus Pro 7600

Summary of Contents for Epson Stylus Pro 7600

  • Page 1 Note: The stand is optional for the Stylus Pro 7600. optional interface paper set lever shield plate USB interface connector parallel interface connector Printer Specifications paper set lever Printing Printing method 7 color EPSON UltraChrome ink or...

  • Page 2: Safety Approvals

    Do not use curled, folded, or deckle-edge paper. ❏ Depending on the media, best feed and print quality are guaranteed on EPSON paper with thicknesses of 3.15 to 4.33 mil (0.08 to 0.11 mm), 64 to 90 gsm. ❏ For best results, use paper under the following conditions:...

  • Page 3: Ink Cartridges

    EPSON media. Data indicate the lightfastness of black and white UltraChrome images printed using the 7-color mode will be rated as greater than 100 years under glass on specific EPSON media. Ink lightfastness ratings are based on accelerated testing of prints on specialty media, displayed indoors, under glass.

  • Page 4: Consumables And Accessories

    Check their type by looking at the installed cartridges. If you install an incorrect cartridge, you will see the message WRONG INK CARTRIDGE. 5 - EPSON Stylus Pro 7600 and 9600 User-Replaceable Parts You can order these user-replaceable parts:...
  • Page 5 The papers you can use vary, depending on whether you have the Photographic Dye ink model or the UltraChrome ink model, as shown in the tables below. NOTE: The Stylus Pro 7600 cannot use paper wider than 24 inches. Papers supported by Photographic Dye ink model Paper type...

  • Page 6: Control Panel

    44-inch roll: S041496 Canvas 24-inch roll: S041531 36-inch roll: S041532 44-inch roll: S041533 NOTE: Check the EPSON Pro Graphics web site (http:// prographics.epson.com) for additional media that may become available. 7 - EPSON Stylus Pro 7600 and 9600 Control Panel Sheet sizes 24"...
  • Page 7 Damaged data was To clear the data, press the sent to the printer. printer’s Power button to turn the printer off. Wait for about a minute, then turn the printer on again. EPSON Stylus Pro 7600 and 9600 - 8...

  • Page 8: Printing A Status Check

    F = nearly empty (or service life near end) F = empty (or service life ended) 6. Press Pause to exit the Test Print menu. 9 - EPSON Stylus Pro 7600 and 9600 Replacing an Ink Cartridge The easiest way of checking ink levels is from the control...
  • Page 9 Banding can be caused by several problems, such as clogged print head nozzles or a mis-aligned print head. It can also be caused by using a paper that is not defined in the EPSON printer driver or in a third-party RIP. To correct this problem, make sure you select the correct paper type in the driver.

  • Page 10: Aligning The Print Head

    If you still see no improvement, contact EPSON for assistance. 11 - EPSON Stylus Pro 7600 and 9600 Aligning the Print Head If banding appears on your prints, or vertical lines are not straight, you need to align the print head.

  • Page 11: Switching Between Black Ink Modes

    14. When done, press Pause to exit the head alignment. Switching Between Black Ink Modes If your printer uses EPSON UltraChrome ink, you can switch between black ink modes to optimize your black ink density. When you installed the cartridges that came with your printer, your printer was initialized in Photo Black Mode.

  • Page 12: Selecting The Black Ink Cartridges

    EPSON Stylus Pro 7600 and 9600 If the printer’s maintenance tank is almost used up, you’ll need to replace it as well. The printer will tell you if it needs to be replaced, but you may wish to check it in advance, as shown below, so you can make sure you have one available, in case it’s needed.

  • Page 13: Charging The Ink

    If you notice that your paper isn’t cut cleanly, the cutter blade may need to be replaced. If you use the blade to cut heavy stock or non-EPSON media, you may need to replace it more often. You can check the status of your cutter by printing the status check sheet (see page 9).

  • Page 14: Replacing The Maintenance Tank

    11. Close the front cover. The carriage returns to the home position and the printer returns to its previous status. 15 - EPSON Stylus Pro 7600 and 9600 Replacing the Maintenance Tank When the maintenance tank is almost full, the Maintenance Tank light on the control panel flashes.

Table of Contents