Epson StylusPRO 7000 Service Manual page 116

EPSON Stylus Pro 7000
4.2.1.5 H Top Cover Removal
1. Remove the R Side Cover as described in 4.2.1.2 "R Side Cover Removal".
2. Remove the L Side Cover as described in 4.2.1.3 "L Side Cover Removal".
3. Remove the I/C Holder Cover as described in 4.2.1.4 "I/C Holder Cover
Removal".
4. Open the Front Cover
5. From the right side, remove two screws (CUPS:M4x8) and from the left
side, remove three screws (CUPS:M4x8).
H Top
Cover
Figure 4-13. H Top Cover Removal on right side
Three
screws
Figure 4-14. H Top Cover Removal on left side
6. Remove the cover by pulling up and toward the rear.
Disassembly & Assembly
4.2.1.6 Rear Cover Removal
1. From the rear, remove two white screws (CPS:M3x12) securing the
optional interface cover, and remove the optional interface cover.
Optional
I/F cover
Two
screws
Figure 4-15. Interface Cover and Screw Removal
2. Remove the two white screws (CP:M3x6) securing the parallel interface
and remove the one white screw (CBS:M3x6) securing the USB interface.
3. Remove the one white screw (CBS:M3x6) securing the AC inlet.
Rear
Cover
H Top
Cover
Disassembly Flow
Two screws
Two screws
Three screws
Three screws
Figure 4-16. Rear Cover Removal
Revision A
One
screw
One
screw
116