Usb Id Copy/Backup; Extracting The Usb-Id Copy Program; After Extracting The Program - Epson StylusPRO 7000 Service Manual

EPSON Stylus Pro 7000

5.6 USB ID Copy/Backup

Each printer has a unique USB ID which is stored in the NVRAM (EEPROM) on
the C299MAIN board. The USB ID is unique for each printer in the same way a
serial number is unique.
Example USB-ID: NE001XXXXXXXXXXXX0 (X =0~9 or A~Z)
If you need to replace the C299MAIN board during service, then you first need
to copy and back up the USB ID. This operation requires the exclusive SP7000
USB-ID Copy Program as well as:
!
PC with MS-DOS or Windows 95
!
Parallel interface connection (compatible mode)

EXTRACTING THE USB-ID COPY PROGRAM

"
SP7000 USB-ID Copy Program
Found on the #F733: Self Training Kit (P/N: 1053426)
File:/AD_PRO_E/SP7K10E.EXE (self-extracting file)
extract the file to a folder you make on the root directory of your hard
drive (example: C:/SP7000/ )
"
PC equipped with Windows 95 or MS-DOS6.2 or above
"
Parallel interface connection

AFTER EXTRACTING THE PROGRAM

1. After extracting the program, confirm that the following files exist:
!
SP7000.PDF file (Readme file)
!
SP7000 versionlist.PDF file (tracks upgrades)
!
SP7000.EXE file (program file)
2. Read the SP7000.PDF file before using the program
3. See the next page.
Adjustment USB ID Copy/Backup
Revision A
193