Resizing Originals By Entering A Scaling Value (Mac Os) - Canon imagePROGRAF iPF770 User Manual

iPF770
8
Select the width of the loaded roll in the
(420.0mm).
9
A
In the Page Size list, click the size of the original as specified in the application. In this case, click ISO
A4.
10
C
Select the Enlarged/Reduced Printing check box.
11
Click ISO A4 in the
12
F
Click Scaling and enter 120.
•
You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and
right edges of the paper will not be printed.
Note
• If the original size after enlargement or reduction is
smaller than the paper size, the original is printed in
the upper-left corner. In this case, you can center
originals by selecting
out sheet.
13
Confirm the print settings and print as desired.
•
For tips on confirming print settings, see "Confirming Print Settings ."
Note

Resizing Originals by Entering a Scaling Value (Mac OS)

Resizing Originals by Entering a Scaling Value (Mac OS)

This topic describes how to enlarge originals before printing by entering a scaling value, based on the following
example.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
Paper type: Plain Paper
•
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1
Choose Page Setup from the application menu to
display the Page Attributes dialog box.
User's Guide
M
Roll Paper Width list—in this case, ISO A2/A3 Roll
G
Paper Size list.
E
Print Centered on the Lay-
Resizing Originals by Entering a Scaling Value (Mac OS)
P.143
➔
65