Canon imagePROGRAF iPF770 User Manual page 486

Troubleshooting Paper Abrasion and Blurry Images
3
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Note
5
Press ▲ or ▼ to select Head Height, and then press the OK button.
6
Press ▲ or ▼ to select the desired setting value, and then press the OK button.
Note
486
• When Head Height is set to Automatic, the setting value selec-
ted for the previous print job is displayed (to the right of Auto-
matic ) once you select the type of paper currently supplied.
However, the value is cleared when the printer is turned off or
the paper is replaced.
•
Using Automatic will ensure that the printer adjusts the Printhead height to the optimal level before print-
ing, accounting for the ambient temperature and humidity. When a setting other than Automatic is used,
that value will always be applied.
•
Depending on the type of paper, some setting values may not be available.
iPF770
User's Guide