Updating Media Information After Installation - Canon imagePROGRAF iPF770 User Manual

iPF770
5
Enter an administrator name/password and click the Install
Software button.
6
Click the Close button.
The installation of Media Configuration Tool is com-
plete.
•
When the installation is completed properly, the Media Configuration Tool folder is saved in the following
folder.
Note
Applications > Canon Utilities > Media Configuration Tool
•
After the installation is finished, update the media information by referring to Updating Media Information
After Installation
Important

Updating Media Information After Installation

Updating Media Information After Installation

If you are running the Media Configuration Tool for the first time after installing it, you need to configure the media
information in the printer control panel and printer driver.
•
You do not need to perform this procedure if you installed the printer driver using the User Software CD-ROM.
•
Important Do not attempt to print or turn the printer off while the program is communicating with the printer.
1
From the Applications menu, select Canon Utilities > imagePROGRAF Media Configuration Tool >
CNWIMCT.
2
The Select Printer dialog box is displayed. Select
the printer for which to configure the media informa-
tion, and then click the Next button.
•
The printers for which the printer driver is installed are displayed. If the printer you want to configure is not
displayed, check whether the printer driver for the target model is correctly installed.
Note
•
In the following screens, you cannot change the printer where media type information is to be updated.
User's Guide
.
P.375
➔
Updating Media Information After Installation
375